Minimize Radon Levels Without a Radon Mitigation System?

Always begin with having your home tested. Once your radon level becomes high again, you have to look for ways to minimize them. It can be very challenging to sufficiently reduce your radon level without setting up a mitigation system. However, if you are particular and careful regarding the installation labor, you can always try to apply some DIY tips that can somehow assist you to minimize your home’s radon level exposure

Keep your home from depressurizing 

Combustion units like fireplaces and wood stoves and exhaust fans can reduce the air pressure within your house. Remember that the lower your indoor air pressure is than the soil underneath it, the more radon gas reaches the home. Once you have a combustion unit or exhaust fan that should be utilized, open the windows placed close to them or set up a permanent system that can produce outdoor air into the units. Once you’ve got an HVAC system with cold-air registers within the basement, guarantee to seal them to minimize basement air leakage into your air ducts.  

Seal your cracks 

Keep in mind that radon gets into our homes through the gaps and cracks in our foundation, flooring, and basement. Identifying and searching for such gaps is imperative. Once you see them, seal them with an epoxy sealant or a caulk. It’ll be difficult to seal each crack. However, repairing enough of them can help improve your radon level. This is still a good thing regardless of how little that impact might be then nothing at all.  


Airing out your home is one of the greatest ways to minimize your radon levels. Make sure to ventilate the lowest area/level within your home, whether that be a basement crawlspace, the living area, or your slab foundation. If you’re ventilating a basement, it may be more comfortable and cost-effective to limit its use and close it off. Open all the windows you have and make a cross breeze. Once radon emerges to the ground outdoor surface, disperses once it reaches the air. These things similarly occur once you let your windows open. The gas that’s been trapped will be dissipated in the fresh air. So, basically ventilate your home by opening your windows as often as you can.  

As soon as you have pushed through the previously mentioned DIY tips to minimize radon levels, try to get a radon inspection in Fort Collins again. Once the result shows that the radon levels of your house are reduced, you just need to keep doing what you have been doing since it is definitely working. On the other hand, when the level got higher or still the same, then the best thing that you should do would be to have a radon mitigation system installed within your home.  

The best way to know the radon level of your home is to have your home tested by the experts within your area today. This can help you if you plan to sell your house or just to keep you and your family safe. 

Leave a Reply

Your email address will not be published. Required fields are marked *